SLP pioneered the underhood cold air package for the Camaro and Firebird. They replace the restrictive, power robbing factory air cleaner assembly. By picking up cool, dense outside air and pumping it directly into the engine these systems are proven to make up to 20 additional horsepower, depending on application. The system is crafted from powder coated 304 stainless steel. The high-gloss, black finish looks great under the hood. Included are two high flow style cone air filters and a custom "block off plate" to isolate the filters from hot underhood air. The smooth flowing, mandrel bent 2.5" diameter intake air tubes are welded into a 3 3/4" diameter collector for a solid, custom fitted assembly. Each kit contains all necessary parts and complete installation instructions. These kits are street legal in all 50 states.

GM's new generation F-Body Camaros and Firebirds are fast — but they can go even faster! Moroso's High Flow Air Induction System increases air flow by 47%, adds 16-20 more horsepower and reduces quarter-mile ET's by a full two tenths.

Designed by the engineers of Callaway Advanced Technology for their "Supernatural" Camaros, this system eliminates airflow restrictions inherent with the stock LT-1 system. In addition, the ultra-low restriction air filter element has been relocated outside the engine compartment for a cooler and more powerful air inlet charge to the cylinders.

These break-through engineering designs contain all the performance improvements you expect from K&N, but with even greater benefits. What is truly remarkable about the Generation II kits is that they consistently achieve incredible horsepower gains even under varying atmospheric conditions. This process is accomplished by replacing the entire air intake tract, thus isolating the cold air and directing the air through this truly unique chamber delivery system. This process may or may not include a heat shield.

Does your engine seem like it's out of breath? You can stop that inwheezingin sound with a Holley high-air-flow throttle body! Made of true cut CNC billet aluminum and highly polished to boot, these new Holley throttle bodies are designed to use the stock TPS and IAC to simplify installation. Holley throttle bodies will allow your engine to perform some really great deep-breathing exercises while you sit back and enjoy the fruits of its labor - horsepower. Don't get left in the dust. New Holley high-flow throttle bodies are the ticket to ride!

BBK's GM throttle bodies have been the number one choice with performance enthusiasts and guaranteed to have the perfect match for all levels of performance. To ensure the highest standards, BBK started with precision 356 aluminum alloys casting that is CNC machined to exact tolerances. Then each unit is assembled with high quality BBK components such as an O-ringed shaft, double sealed roller bearings, precision die-stamped linkage assemblies along with factory quality fittings and connectors to ensure a perfect installation and life-long use.

Designed by Edelbrock and assembled by Magnetti Marelli Powertrain USA Inc., a major manufacturer of OEM throttle bodies, these throttle bodies come equipped with a new throttle position sensor for bolt-on perfomrance, out-of-the-box. Magnetti Marelli uses sophisticated machinery to electronically set the butterfly and throttle position sensors for absolute accuracy. With a 25% larger bore area than stock, Edelbrock throttle bodies increase performance and bolt to the stock manifold with mounts for stock sensors and vacuum lines.

This replacement unit features 47% more airflow capacity than the stock sensor and state-of-the-art hybrid electronics. The advanced, active-electronic module packaged within the sensor provides improved control of injector timing, contributing to a performance gain of 10-15 horsepower at the rear wheels. This unit installs in minutes, and is legal in all 50 states. The sensor is housed in a rugged, high impact, injection molded body to reduce heat soak, which can alter sensor performance. Installation does not affect mileage or drivability under normal conditions. One year warranty.

The JET Powr-Flo Mass Air Sensor delivers improved horsepower, torque and mileage from your car, truck or SUV by simply replacing the restrictive stock mass air sensor. The factory sensor not only is a major restrictive point in stock intake systems, but it also limits the full potential of aftermarket cold air intake systems. The flow bench tested design of the JET Mass Air Sensor provides airflow increases of up to 45% and installs in 10 minutes or less. Compatible with other aftermarket upgrades such as computer upgrades, cold air intakes, TBI spacers, free flow exhaust systems, etc.
 

SLP-210280430:

Replacement close-off panel for vehicles equipped with a ram air hood, such as Camaro SS, Firehawk, Ultra Z and WS-6.

SLP-210280431:

Replacement close-off panel for vehicles equipped with one of the following SLP air boxes: (Part #21012, #21013, #21014).

SLP's throttle body flow booster improves air flow at the entrance of your throttle body by 30 CFM. This airfoil shaped piece smoothes and directs airflow into the throttle body and makes up to 7 additional horsepower. The flow booster is manufactured from aircraft-quality, cast aluminum and includes all installation hardware and instructions for easy bolt-on installation. For maximum benefit, add an SLP cold air package.

Talk about a smooth operator! This Holley airfoil kit easily adapts to the stock GM throttle body on Chevrolet 5.7L TPI and LT-1 engines used on Camaros and Firebirds. It acts to smooth out and minimize the turbulence of the incomig flow of air into the throttle body. This will effectively increase the amount of air flow. More incoming air means more horsepower. Installation is easy; simply snap it into place in the mouth of the throttle body and it's ready to work. Made from space age elastomer, the Holley airfoil will perform effectively and unobtrusively for years.

Easy bolt-on installation. The air box assembly includes all installation hardware, hood seal, low restriction air filter and wiring harness for MAF (1994-1997 vehicles only) and is available for 3800 V6 and V8 engines. Adds up to 15 horsepower on V8 engines, 10 HP on V6. Use with SLP hoods (Part #100000 & #100002).

Superchargers are a safe, effective and reliable way to get big horsepower and torque gains from your Camaro. While they may perform the same general function, not all superchargers are the same. Unlike the competition, who rely on planetary bearing or noisy gear drives, the Powerdyne unit utilizes an ultra strong, internal cog belt to drive the impeller. The key to the impressive horsepower gains is the curved-vane impeller. this design is similar to impellers used on high output turbochargers except it allows boost pressure to arrive as low as 1800 RPM, and build all the way to redline. The Powerdyne system reduces typical supercharger whine greatly producing the perfect "sleeper" Camaro. Also in comparison to the competition's units, there are no oil lines to tap into the oil pan, or external pumps and coolers. Everything necessary for an easy installation is supplied including all brackets, mounting hardware and detailed instructions.